Experimental study on the permeability and self-healing capacity of geosynthetic clay liners in heavy metal solutions

Geosynthetic clay liners (GCLs), which have a very low permeability to water and a considerably high self-healing capacity, are widely used in liner systems of landfills. In this study, a series of experimental tests were carried out under complex conditions on typical commercial GCLs from China. In particular, the effects of pH values and lead ions (Pb²⁺) were tested in addition to other factors. The swelling properties of natural bentonite encapsulated between geotextile components in the GCLs were tested first. The swelling capacity was reduced rapidly at pH values < 3 and concentrations of Pb²⁺ >40 mM. Permeability tests on GCLs with different concentrations of lead ions were then performed by using the self-developed multi-link flexible wall permeameter, and data showed that increases in lead ion concentrations greatly improved the permeability. Finally, self-healing capacity tests were conducted on needle-punched GCLs under different levels of damage. Results showed that the GCLs have a good self-healing capacity with small diameter damage holes (2 mm, close to three times the original aperture), but with a damage aperture larger than 15% of the sample area, the self-healing capacity could not prevent leakage; hence, in certain situations it will be necessary to repair the damage to meet the anti-seepage requirement.     

First-principles study on the dissolution and diffusion behavior of hydrogen in carbide precipitates

To understand the hydrogen (H) behavior in the carbide precipitates, the dissolution and diffusion properties of interstitial H in the transition metal carbide (TMC; TM = Hf, Nb, Ta, Ti, V, and Zr) were studied by first-principles calculations. In these carbides, it can be seen that H tends to occupy the trigonal site (tri2-site) surrounded by three transition metal atoms and one carbon atom rather than the face center (fc-site) and the body center (bc-site) which with the larger space. We found that the bonding interaction between H atom and the nearest-neighbor (1NN) carbon atom is the dominant influence on the stability of H dissolution. Besides, we obtained the temperature-dependent solubility and diffusion coefficients of H in TMC and pure vanadium through Sievert's law and transition state theory. Compared with pure vanadium, H shows the worse solubility in TMC, and it is more difficult for hydrogen to migrate in TMC, but segregate toward the interface. Furthermore, it is interesting to note that, the diffusion barrier and the H solution energy show a linear relationship for transition metal carbides in the same period. These results can help us deepen the understanding of H behavior in vanadium alloys strengthened by carbide precipitates, and furtherly providing the theoretical guidance for the design of alloys with excellent performance.     

基于微电源输出功率的微电网自适应电流保护

由可再生能源组成的微电网得到了广泛应用,大量可再生能源的加入使得微网的拓扑结构灵活多变,传统的继电保护难以满足微电网保护要求.提出了一种基于微源输出功率的微电网自适应电流保护方案.通过分布式智能配电终端装置(DSTU)采集线路实时的电气参数,并对电流进行整定,根据各个微源的输出功率判断是否启动电流整定.对典型工况在PSCAD/EMTDC上进行了仿真验证,仿真结果表明,该方案对于降低保护配置成本、提高微电网保护的可靠性具有重要意义.     

基于云平台的智能实验室远程监控系统

针对实验室管理中存在的安全问题,提出并设计了一种基于云平台的智能实验室远程监控系统.利用FRID技术对进出人员信息进行记录.在实验室内安装温度传感器和湿度传感器,把实验室内的环境数据上传至云平台,当温度传感器和湿度传感器检测到实验室环境参数异常时,云平台将实验室的数据信息及时反馈到当时正在值班的管理员的移动电话端上,提示实验室可能存安全隐患.烟雾传感器可以检测实验室的烟雾浓度和可燃气体.实验表明,系统可以在不同环境下正常工作,且运行可靠,反馈给云平台的数据和检测到的实验室环境参数准确,有助于提高实验室安全性.     

The dispersed SiO2 microspheres supported Ru catalyst with enhanced activity for ammonia decomposition

Ru nanoparticles supported on SiO₂ microspheres (Ru/SiO₂-GUS) were prepared by the glucose-urea-metallic salt method and applied in the decomposition of ammonia. In the glucose-urea-metallic salt method, glucose as the carbon template plays a significant role in the formation of diffusion-beneficial structural properties of Ru/SiO₂-GUS, and also induceds the modification of the electronic state of Ru. Ru/SiO₂-GUS exhibited higher catalytic activity compared with the catalyst prepared with the impregnation method. The catalytic performance of Ru/SiO₂-GUS was further enhanced with the addition of either K or Cs——the addition order and amount strongly affecting the catalytic performance. When the ratio of K/Cs to Ru is 2, the alkali metal (KOH/CsOH) solution is added in the homogeneous solution of glucose, urea, RuCl₃ and the colloidal silica, the promotion effect of K/Cs is the strongest, particularly under lower reaction temperatures. However, the promotion effects of K and Cs are different as reveled by the combined results of H₂-TPR, XPS and NH₃-TPSR. More NH₃ can be absorbed on K–Ru/SiO₂-GUS and the electron density of Ru decreased. By contrast, more metallic Ru formed on Cs–Ru/SiO₂-GUS, facilitating N₂ recombination.     

Enhanced photo-electrochemical activity of ZnO/Cu2S nanotube arrays photocathodes

ZnO/Cu₂S nanotube arrays are fabricated firstly by a facile and capping-agent-free method, and the photo-electrochemical performance has been studied systematically. The results show that ZnO/Cu₂S nanotube arrays achieve enhanced photo-electrochemical water splitting performance and the photocurrent densities of ZnO/Cu₂S are 7.9 times than that of ZnO at 0 V versus Ag/AgCl. The performance of the ZnO/Cu₂S nanotube arrays can be adjusted by changing the amount of Cu₂S microcrystals. The results confirm that the enhanced photo-electrochemical performance of ZnO/Cu₂S is due to the significantly improved visible light absorption, effective separation of photo-induced carriers due to the well band energy match and the formed p-n junction between ZnO and Cu₂S.     

Utilization and impacts of hydrogen in the ironmaking processes: A review from lab-scale basics to industrial practices

Hydrogen (H₂) energy is a promising candidate to replace carbon monoxide (CO) as a reductant for iron oxide reduction in revolutionary ironmaking industrial processes, and numerous studies have been conducted to intensively study the utilization and impact of H₂ in ironmaking processes. Therefore, this review first collects and compares the H₂-assisted reduction mechanism and kinetics. The impacts of H₂ on the reduction accompanying behaviors, such as the disintegration, swelling, sticking, softening, and melting of iron ores, are then summarized. Third, the performance of H₂ predicted by either mass and heat balance models or numerical simulation models in various ironmaking processes is highlighted. Finally, the different applications of hydrogen-rich materials in blast furnace and non-blast furnace ironmaking processes are further compared to illuminate H₂ utilization before our outlook on the use of H₂ in the ironmaking industry.     

地表水中石油类监测存在的问题与对策

为使我国地表水中石油类检测过程更具可操作性和推广性,使各实验室石油类检测结果更具可对比性和量值溯源性,本文从地表水中石油类样品采集、样品检测及标准物质选取等三个方面对当前国内外相关标准中规定内容进行了汇总梳理,得出目前采用的样品采集方法均难以保证样品代表性、各种检测方法关注点不同且各有利弊、标准物质的选取对最终测定结果有较大影响的结论。为解决上述难题,建议开展以下3方面工作:(1)研发一种符合地表水中石油类赋存状况的水样采集器;(2)将地表水环境质量标准中"石油类"指标分为"低沸点挥发性石油类"和"高沸点半挥发性石油类"指标分别检测;(3)分流域或河流开展石油类标准物质研制工作。     

Effect of Molybdenum on the Microstructure and Oxidation Behavior of Hot-Pressed TaCr2 Alloys

Metal Science and Heat Treatment - Influence of molybdenum additions on the microstructure and corrosion resistance of powder alloys based on the TaCr2 Laves phase is studied. The phase composition...     

Selective clustering for representative paintings selection

Multimedia Tools and Applications - Selective classification (or rejection based classification) has been proved useful in many applications. In this paper we describe a selective clustering...